2023 Zoning Amendments Public Hearing
Goffstown Planning Board
The Goffstown Planning Board will hold its first public hearing on its proposed 2023 Zoning Amendments in the Mildred Stark Room (Room 106) of the Goffstown Town Hall, located on 16 Main Street, Goffstown, New Hampshire on Thursday, December 08, 2022. The meeting will begin at 7:00 PM. Explanations of the proposed amendments are as follows and full-text copies may be obtained from the Town’s Website, the Planning Department, and the Town Clerk’s Office, located on 16 Main Street, Goffstown, NH during the hours of 8 am-4 pm, Monday-Friday. For ADA assistance in attending the meeting please, call 497-8990, Ext. 117 at least 72 hours in advance.
Shall the Town adopt Amendment No. 1, as proposed by the Goffstown Planning Board, by removing all references to residential use, multi-family use, and mixed-use residential as permitted uses in the Commercial Industrial Flex Zone (CIFZ) in Sections 3.11, 5.9, 4.3, and 2.3.9. Also, add a sentence in Section 2.3.9, “Residential uses are not allowed in the Commercial Industrial Flex Zone (CIFZ)”.
Shall the Town adopt Amendment No. 2, as proposed by the Goffstown Planning Board, by removing various zoning restrictions for the location of Tattoo Parlors from Sections 5.4., and 3.11?
Shall the Town adopt Amendment No. 3, as proposed by the Goffstown Planning Board, by removing Section 15.3.7.5 Report from the Planning Board, in its entirety, where Zoning Board applications relating to (a) a commercial or industrial project or use, or (b) a residential use of three or more units for which Site Plan approval will be required, are delivered to the Planning Board for comment?
Shall the Town adopt Amendment No. 4, as proposed by the Goffstown Planning Board, by removing Section 15.8, Violations, in its entirety and refer to the NH State Statutes for violation procedures?
Shall the Town adopt Amendment No. 5, as proposed by the Goffstown Planning Board, by adding Section 6.6.5. Electronic Message Centers (EMC), All electronic changing signs shall be equipped with automatic dimming controls, so the brightness level will be highest during the day and lowest at night. Manufacturer specifications shall be submitted at the time of the sign permit specifying maximum sign brightness?
Tim Redmond, Chairman
Goffstown Planning Board